Public-domain · open source
OpenJurist

energy conservation measure

Defined in 6 places across 3 titles of the United States Code.

For purposes of this section, the term “energy conservation measure” means any installation or modification primarily designed to reduce consumption of electricity or natural gas or to improve the management of energy demand—

(A) with respect to a dwelling unit, and

(B) on or after January 1, 1995, with respect to property other than dwelling units.

The purchase and installation of specially defined energy property shall be treated as an energy conservation measure described in subparagraph (B).

Source

  • 1994–199626 U.S.C. § 136Internal Revenue Code · Energy conservation subsidies provided by public utilities · for purposes of this section

For purposes of this section, the term “energy conservation measure” means any installation or modification primarily designed to reduce consumption of electricity or natural gas or to improve the management of energy demand with respect to a dwelling unit.

Source

The term “energy conservation measure” means a measure which modifies any building, building system, energy consuming device associated with the building, or industrial plant, the construction of which has been completed prior to May 1, 1989, if such measure has been determined by means of an energy audit or by the Secretary, by rule under section 6325(e)(1) of this title, to be likely to maintain or improve the efficiency of energy use and to reduce energy costs (as calculated on the basis of energy costs reasonably projected over time, as determined by the Secretary) in an amount sufficient to enable a person to recover the total cost of purchasing and installing such measure (without regard to any tax benefit or Federal financial assistance applicable thereto) within the period of—

(A) the useful life of the modification involved, as determined by the Secretary, or

(B) 15 years after the purchase and installation of such measure,

Source

The term "energy conservation measure" means a measure which modifies any building, building system, energy consuming device associated with the building, or industrial plant, the construction of which has been completed prior to May 1, 1989, if such measure has been determined by means of an energy audit or by the Secretary, by rule under section 6325(e)(1) of this title, to be likely to maintain or improve the efficiency of energy use and to reduce energy costs (as calculated on the basis of energy costs reasonably projected over time, as determined by the Secretary) in an amount sufficient to enable a person to recover the total cost of purchasing and installing such measure (without regard to any tax benefit or Federal financial assistance applicable thereto) within the period of—

(A) the useful life of the modification involved, as determined by the Secretary, or

(B) 15 years after the purchase and installation of such measure,

whichever is less. Such term does not include (i) the purchase or installation of any appliance, (ii) any conversion from one fuel or source of energy to another which is of a type which the Secretary, by rule, determines is ineligible on the basis that such type of conversion is inconsistent with national policy with respect to energy conservation or reduction of imports of fuels, or (iii) any measure, or type of measure, which the Secretary determines does not have as its primary purpose an improvement in efficiency of energy use.

Source

The term “energy conservation measure” means an installation or modification of an installation in a building which is primarily intended to maintain or reduce energy consumption and reduce energy costs or allow the use of an alternative energy source, including, but not limited to—

(A) insulation of the building structure and systems within the building;

(B) storm windows and doors, multiglazed windows and doors, heat absorbing or heat reflective glazed and coated windows and door systems, additional glazing, reductions in glass area, and other window and door system modifications.1

(C) automatic energy control systems and load management systems;

(D) equipment required to operate variable steam, hydraulic, and ventilating systems adjusted by automatic energy control systems;

(E) solar space heating or cooling systems, solar electric generating systems, or any combination thereof;

(F) solar water heating systems;

(G) furnace or utility plant and distribution system modifications including—

(i) replacement burners, furnaces, boilers, or any combination thereof, which substantially increases the energy efficiency of the heating system,

(ii) devices for modifying flue openings which will increase the energy efficiency of the heating system,

(iii) electrical or mechanical furnace ignition systems which replace standing gas pilot lights, and

(iv) utility plant system conversion measures including conversion of existing oil- and gas-fired boiler installations to alternative energy sources, including coal;

(H) caulking and weatherstripping;

(I) replacement or modification of lighting fixtures which replacement or modification increases the energy efficiency of the lighting system without increasing the overall illumination of a facility (unless such increase in illumination is necessary to conform to any applicable State or local building code or, if no such code applies, the increase is considered appropriate by the Secretary);

(J) energy recovery systems;

(K) cogeneration systems which produce steam or forms of energy such as heat, as well as electricity for use primarily within a building or a complex of buildings owned by a school or hospital and which meet such fuel efficiency requirements as the Secretary may by rule prescribe;

(L) such other measures as the Secretary identifies by rule for purposes of this part; and

(M) such other measures as a grant applicant shows will save a substantial amount of energy and as are identified in an energy audit prescribed pursuant to section 6325(e)(2) of this title.

Source

The term “energy conservation measure” means an installation or modification of an installation in a building which is primarily intended to maintain or reduce energy consumption and reduce energy costs or allow the use of an alternative energy source, including, but not limited to—

(A) insulation of the building structure and systems within the building;

(B) storm windows and doors, multiglazed windows and doors, heat absorbing or heat reflective glazed and coated windows and door systems, additional glazing, reductions in glass area, and other window and door system modifications;

(C) automatic energy control systems and load management systems;

(D) equipment required to operate variable steam, hydraulic, and ventilating systems adjusted by automatic energy control systems;

(E) solar space heating or cooling systems, solar electric generating systems, or any combination thereof;

(F) solar water heating systems;

(G) furnace or utility plant and distribution system modifications including—

(i) replacement burners, furnaces, boilers, or any combination thereof, which substantially increases the energy efficiency of the heating system,

(ii) devices for modifying flue openings which will increase the energy efficiency of the heating system,

(iii) electrical or mechanical furnace ignition systems which replace standing gas pilot lights, and

(iv) utility plant system conversion measures including conversion of existing oil- and gas-fired boiler installations to alternative energy sources, including coal;

(H) caulking and weatherstripping;

(I) replacement or modification of lighting fixtures which replacement or modification increases the energy efficiency of the lighting system without increasing the overall illumination of a facility (unless such increase in illumination is necessary to conform to any applicable State or local building code or, if no such code applies, the increase is considered appropriate by the Secretary);

(J) energy recovery systems;

(K) cogeneration systems which produce steam or forms of energy such as heat, as well as electricity for use primarily within a building or a complex of buildings owned by a school or hospital and which meet such fuel efficiency requirements as the Secretary may by rule prescribe;

(L) such other measures as the Secretary identifies by rule for purposes of this part; and

(M) such other measures as a grant applicant shows will save a substantial amount of energy and as are identified in an energy audit prescribed pursuant to section 6325(e)(2) of this title.

Source

The terms "energy audit", "energy conservation measure", and "renewable-resource energy measure" have the meanings given the terms in section 361(c) of the Energy Policy and Conservation Act [42 U.S.C. 6321(c)].

Source

The terms “energy audit”, “energy conservation measure”, and “renewable-resource energy measure” have the meanings prescribed for such terms in section 366 of the Energy Policy and Conservation Act [42 U.S.C. 6326].

Source

The terms "energy audit", "energy conservation measure", "renewable-resource energy measure", "building", and "industrial plant" have the meanings given the terms in section 6321(c) of this title.

Source

The terms “energy audit”, “energy conservation measure”, “renewable-resource energy measure”, “building”, and “industrial plant” have the meanings prescribed for such terms in section 6326 of this title.

Source

  • 1994–202142 U.S.C. § 6881The Public Health and Welfare · Energy resource and renewable-resource obligation guarantee program · as used in this part

The terms “hospital”, “State”, “school”, “Governor”, “State energy agency”, “energy conservation measure”, “energy conservation maintenance and operating procedure”, “preliminary energy audit”, “technical assistance costs”, “energy audit” and “Secretary” have the meanings provided in section 6371 of this title.

Source