Public-domain · open source
OpenJurist

Utah Code § 41-6a-1506

Motorcycles -- Required equipment -- Brakes

Amended by Chapter 334, 2026 General Session

(1) A motorcycle shall be equipped with the following items:

(a) one head lamp that, when factory equipped with an automatic lighting ignition system, may not be disconnected;

(b) one tail lamp;

(c) either a tail lamp or a separate lamp which illuminates the rear license plate with a white light;

(d) one red reflector on the rear, either separate or as part of the tail lamp;

(e) one stop lamp;

(f) a braking system, other than parking brake, in accordance with Section 41-6a-1623;

(g) a horn or warning device in accordance with Section 41-6a-1625;

(h) a muffler and emission control system in accordance with Section 41-6a-1626;

(i) a mirror in accordance with Section 41-6a-1627; and

(j) tires in accordance with Section 41-6a-1636.

(2) An autocycle shall be equipped with the following items:

(a) a seatbelt for each seat installed in the autocycle in accordance with Section 41-6a-1628;

(b) at least one head lamp that, when factory equipped with an automatic lighting ignition system, may not be disconnected;

(c) at least one tail lamp;

(d) either a tail lamp or a separate lamp that illuminates the rear license plate with a white light;

(e) at least one red reflector, either separate or as part of the tail lamp or tail lamps;

(f) at least one stop lamp;

(g) a braking system, other than a parking brake, in accordance with Section 41-6a-1623;

(h) a horn or warning device in accordance with Section 41-6a-1625;

(i) a muffler and emission control system in accordance with Section 41-6a-1626 that, when factory equipped, may not be removed;

(j) a mirror in accordance with Section 41-6a-1627; and

(k) tires in accordance with Section 41-6a-1636.

(3) A violation of this section is an infraction.

Official source: Utah State Legislature. Reproduced from public-domain Utah statutes; confirm against the official source for the current text. Not legal advice.