Cal. Bus. & Prof. Code § 12509
Weighing and Measuring Devices
Redline — January 1, 2011 → current.View current text →
Current — January 1, 2013
As of January 1, 2011
When any weight, measure, or weighing or measuring instrument has been repaired and corrected, and has been reinspected and found correct the sealer shall remove the tag or device with the words “out of order,” and shall seal and mark such weight, measure, or weighing or measuring instrument in the manner provided for the marking of the same where, upon inspection, it is found correct.
(a) When any weight, measure, or weighing or measuring instrument has been repaired and corrected, and has been reinspected and found correct, the sealer shall remove the tag or device with the words “out of order,” and shall seal and mark that weight, measure, or weighing or measuring instrument in the manner provided for the marking of the same where, upon inspection, it is found correct.
Upon completion of corrective repairs or adjustments, and with the authorization from the sealer, a repairman may remove an “out of order” tag or device, and the weight, measure, or weighing or measuring instrument may be placed in service pending reinspection by the sealer.
(b) Upon completion of corrective repairs or adjustments, and with the authorization from the sealer, a registered service agency, as defined in Section 12531, may remove an “out of order” tag or device, and the weight, measure, or weighing or measuring instrument may be placed in service pending reinspection by the sealer.
Official source: California Legislative Information. Reproduced from public-domain California statutes; confirm against the official source for the current text. Not legal advice.