Public-domain · open source
OpenJurist

N.C. Gen. Stat. § 20-135.4

Certain automobile safety standards

Redline — April 1, 2022 → current.View current text →
Current — June 1, 2022
As of April 1, 2022
(1) Definitions. — For the purposes of this section, the term “private passenger automobile” means a four-wheeled motor vehicle designed principally for carrying passengers on public roads and highways.
(1) Definitions. — For the purposes of this section, the term “private passenger automobile” means a four-wheeled motor vehicle designed principally for carrying passengers on public roads and highways.
(2) , (c) Repealed by Session Laws 1975, c. 856.
(3) Prohibited Modifications. — A private passenger automobile shall not be operated upon any highway or public vehicular area if, by alteration of the suspension, frame, or chassis, the height of the front fender is 4 or more inches greater than the height of the rear fender. For the purposes of this subsection, the height of the fender shall be a vertical measurement from and perpendicular to the ground, through the centerline of the wheel, and to the bottom of the fender.
(2) , (c) Repealed by Session Laws 1975, c. 856. (d) Prohibited Modifications. — A private passenger automobile shall not be operated upon any highway or public vehicular area if, by alteration of the suspension, frame, or chassis, the height of the front fender is 4 or more inches greater than the height of the rear fender. For the purposes of this subsection, the height of the fender shall be a vertical measurement from and perpendicular to the ground, through the centerline of the wheel, and to the bottom of the fender.

Official source: North Carolina General Assembly. Reproduced from public-domain North Carolina statutes; confirm against the official source for the current text. Not legal advice.