Public-domain · open source
OpenJurist

N.Y. ENG Law § 16-106

Administration of article

Showing this section's text as in effect on January 1, 2015 (in force January 1, 2015 – January 1, 2020). View current text →

§ 16-106. Administration of article. 1. The secretary, in consultation\nwith the president, shall have and be entitled to exercise the following\npowers and duties:\n (a) To establish energy efficiency performance standards for the\nproducts listed in subdivision one of section 16-104 of this article,\nincluding but not limited to, establishing energy efficiency performance\nstandards for power supplies in the active mode and no-load mode or\nother such products while in the active mode and in the\nstandby-passive-mode.\n (b) To promulgate regulations to achieve the purposes of this article\nprovided however that no energy efficiency performance standard shall\nbecome effective for a product less than one hundred eighty days after\nit shall become final, provided, however, that no standard adopted\npursuant to this article shall go into effect if federal government\nenergy efficiency performance standards regarding such product preempt\nstate standards unless preemption has been waived pursuant to federal\nlaw;\n (c) To administer and enforce the provisions of this article and any\nrule or regulation promulgated thereunder or order issued pursuant\nthereto;\n (d) To order, pursuant to section 16-104 of this article, the\nimmediate cessation of any distribution, sale or offer for sale, import\nor installation of any product for which the secretary, in consultation\nwith the president, determines that the certification of such product\nlisted in subdivision one of section 16-104 of this article was achieved\nin violation of section 16-108 of this article;\n (e) To conduct investigations, test, and obtain data with respect to\nresearch experiments and demonstrations, and to collect and disseminate\ninformation regarding the purposes to be achieved pursuant to this\narticle;\n (f) To accept grants or funds for purposes of administration of this\narticle;\n (g) To impose a fine and/or impose injunctive relief for any violation\nof this article after notice and an opportunity to be heard;\n (h) The secretary and the president shall consult with the appropriate\nfederal agencies, including, but not limited to, the federal department\nof energy, industry and other potentially affected parties in carrying\nout the provisions of this article.\n 2. (a) On or before June thirtieth, two thousand six, the secretary,\nin consultation with the president, shall adopt regulations in\naccordance with the provisions of this article establishing: (i) energy\nefficiency performance standards for new products of the types set forth\nin paragraphs (a) through (n) of subdivision one of section 16-104 of\nthis article, with the exception of such paragraph (g) (incandescent\nreflector lamps); (ii) procedures for testing the energy efficiency of\nthe products covered by paragraphs (a) through (n) of subdivision one of\nsection 16-104 of this article; (iii) procedures for manufacturers to\ncertify that products covered under this article meet the energy\nefficiency standards to be promulgated under this article; and (iv) such\nfurther matters as are necessary to insure the proper implementation and\nenforcement of the provisions of this article. With respect to\nincandescent reflector lamps, included in paragraph (g) of subdivision\none of section 16-104 of this article, the secretary, in consultation\nwith the president, shall conduct a study to determine whether an energy\nefficiency performance standard for such product should be established,\ntaking into account factors including the potential impact on\nelectricity usage, product availability and consumer and environmental\nbenefits. If it is determined based on this study that such a standard\nwould reduce energy use and would not be preempted by the federal law,\nthe secretary, in consultation with the president, shall adopt\nregulations in accordance with the provisions of this article\nestablishing energy performance standards for such product on or before\nJanuary first, two thousand eight.\n (b) With respect to the products defined in subdivision seven of\nsection 16-102 of this article (very large commercial package air\nconditioning and heating equipment), subdivision nine of section 16-102\nof this article (commercial refrigerators, freezers and refrigerator -\nfreezers), subdivision twenty-three of section 16-102 of this article\n(metal halide lamp fixtures) and subdivision three of section 16-102 of\nthis article (automatic commercial ice-cube makers), the secretary shall\nissue regulations pursuant to paragraph a of this subdivision\nestablishing energy efficiency performance standards for such products\nat the following levels and with the following compliance dates:\n (i) very large commercial package air conditioning and heating\nequipment. Each very large commercial package air conditioning and\nheating equipment sold, offered for sale or installed in New York state\non or after January first, two thousand ten shall, when tested according\nto the test standard specified in Air-Conditioning and Refrigeration\nInstitute standard 340/360-2004, meet the following standards:\n (A) The minimum energy efficiency ratio of air-cooled central air\nconditioners at or above two hundred forty thousand BTU per hour\n(cooling capacity) and less than seven hundred sixty thousand BTU per\nhour (cooling capacity) shall be\n (I) 10.0 for equipment with no heating or electric resistance heating\nand;\n (II) 9.8 for equipment with all other heating system types that are\nintegrated into the equipment (at a standard rating of ninety-five\ndegrees Fahrenheit dB).\n (B) the minimum energy efficiency ratio of air-cooled central air\nconditioner heat pumps at or above two hundred forty thousand BTU per\nhour (cooling capacity) and less than seven hundred sixty thousand BTU\nper hour (cooling capacity) shall be\n (I) 9.5 for equipment with no heating or electric resistance heating;\nand\n (II) 9.3 for equipment with all other heating system types that are\nintegrated into the equipment (at a standard rating of ninety-five\ndegrees Fahrenheit dB).\n (C) the minimum coefficient of performance in the heating mode of\nair-cooled central air conditioning heat pumps at or above two hundred\nforty thousand BTU per hour (cooling capacity) and less than seven\nhundred sixty thousand BTU per hour (cooling capacity) shall be 3.2 (at\na high temperature rating of forty-seven degrees Fahrenheit dB);\n (ii) commercial refrigerators and freezers. (A) Each commercial\nrefrigerator, freezer, and refrigerator-freezer with a self-contained\ncondensing unit designed for holding temperature applications sold,\noffered for sale or installed in New York state on or after January\nfirst, two thousand ten shall have a daily energy consumption (in\nkilowatt hours per day) not to exceed:\n (I) refrigerators with solid doors 0.10 V + 2.04\n (II) refrigerators with transparent doors 0.12 V + 3.34\n (III) freezers with solid doors 0.40 V + 1.38\n (IV) freezers with transparent doors 0.75 V + 4.10\n (V) refrigerators/freezers with solid doors the greater of:\n0.27AV-0.71 or 0.70\n (B) Each commercial refrigerator with a self-contained condensing unit\ndesigned for pull-down temperature applications sold, offered for sale\nor installed in New York state on or after January first, two thousand\nten shall have a daily energy consumption (in kilowatt hours per day)\nnot to exceed: refrigerators with transparent doors 0.126 V + 3.51.\n (iii) metal halide lamp fixtures. Each metal halide lamp fixture that\nis sold, offered for sale or installed in New York state on or after\nJanuary first, two thousand eight and that operates a lamp in a vertical\nposition (including fixtures that operate lamps rated for use within\nfifteen degrees of vertical) and that is capable of operating lamps\nrated equal to or greater than one hundred fifty Watts and less than or\nequal to five hundred Watts shall not contain a probe start metal-halide\nballast.\n (iv) automatic commercial ice-cube maker. Each automatic commercial\nice-cube maker, that produces cube-type ice with capacities between\nfifty and two thousand five hundred pounds per twenty-four hour period\nsold, offered for sale or installed in New York state on or after\nJanuary first, two thousand ten, when tested according to the test\nstandard specified in air-conditioning and refrigeration institute\nstandard 810-2003, as in effect on January first, two thousand five,\nshall meet the following standard levels:\n (A) H means the harvest rate in pounds per twenty-four hours. For\nwater-cooled equipment, water use is for the condenser only and does not\ninclude potable water used to make ice.\n (B) For ice making head water-cooled equipment the maximum condenser\nwater use in gal/one hundred pounds of ice shall be 200-0.022H and the\nmaximum energy use with a harvest rate of:\n (I) < 500 shall be 7.8-0.0055H;\n (II) 500 and < 1,436 shall be 5.58-0.0044H\n (III) 1,436 and < 2,500 shall be 4.0\n (C) For ice making head air-cooled equipment the maximum energy use\nwith a harvest rate of:\n (I) < 450 shall be 10.26-0.0086H;\n (II) 450 and < 2,500 shall be 6.89-0.0011H\n (D) For remote condensing but not remote compressor air-cooled\nequipment the maximum energy use with a harvest rate of:\n (I) < 1,000 shall be 8.85 - 0.0038H;\n (II) 1,000 and < 2,500 shall be 5.10\n (E) For remote condensing and remote compressor air-cooled equipment\nthe maximum energy use with a harvest rate of:\n (I) < 934 lbs shall be 8.85 - 0.0038H;\n (II) 934 and < 2,500 shall be 5.3\n (F) For self-contained water-cooled equipment the maximum condenser\nwater use in gal/100 lbs of Ice shall be 191 - 0.0315H and the maximum\nenergy use with a harvest rate of:\n (I) < 200 shall be 11.4 - 0.019H;\n (II) 200 and < 2,500 shall be 7.6\n (G) For self-contained air-cooled equipment the maximum energy use\nwith a harvest rate of:\n (I) < 175 shall be 18.0 - 0.0469H\n (II) 175 and < 2,500 shall be 9.8\n (c) On or before December thirty-first, two thousand ten, the\nsecretary, in consultation with the president, shall adopt regulations\nin accordance with the provisions of this article establishing: (i)\nenergy efficiency performance standards for new products of the types\nset forth in paragraphs (o) through (s) of subdivision one of section\n16-104 of this article; (ii) procedures for testing the energy\nefficiency of the products covered by paragraphs (o) through (s) of\nsubdivision one of section 16-104 of this article; (iii) procedures for\nmanufacturers to certify that products covered by paragraphs (o) through\n(s) of subdivision one of section 16-104 of this article meet the energy\nefficiency standards promulgated under this article; and (iv) such\nfurther matters as are necessary to insure the proper implementation and\nenforcement of the provisions of this article with respect to the\nproducts covered by paragraphs (o) through (s) of subdivision one of\nsection 16-104 of this article.\n 3. Subsequent to adopting regulations pursuant to subdivisions one and\ntwo of this section, the secretary, in consultation with the president,\nmay amend such regulations, including increasing the stringency of the\nenergy efficiency performance standards, provided however that no energy\nefficiency performance standard shall become effective for a product\nless than one hundred eighty days after it shall become final.\n

Official source: NYS Open Legislation (New York State Senate). Reproduced from public-domain New York statutes; confirm against the official source for the current text. Not legal advice.