42 U.S.C. § 17013
Section 17013 · Advanced technology vehicles manufacturing incentive program
Current version, with additions and removals from the December 19, 2007 version.
In this section:
In this section:
(1) Advanced technology vehicle
(1) Advanced technology vehicle
(A) an ultra efficient vehicle or a light duty vehicle that meets—
(B) a medium duty vehicle or a heavy duty vehicle that exceeds 125 percent of the greenhouse gas emissions and fuel efficiency standards established by the final rule of the Environmental Protection Agency entitled "Greenhouse Gas Emissions and Fuel Efficiency Standards for Medium- and Heavy-Duty Engines and Vehicles—Phase 2" (81 Fed. Reg. 73478 (October 25, 2016));
(C) a train or locomotive;
(D) a maritime vessel;
(E) an aircraft; and
(F) hyperloop technology.
(2) Combined fuel economy
(2) Combined fuel economy
The term “combined fuel economy” means—
The term "combined fuel economy" means—
(A) the combined city/highway miles per gallon values, as reported in accordance with section 32904 of title 49; and
(A) the combined city/highway miles per gallon values, as reported in accordance with section 32904 of title 49; and
(B) in the case of an electric drive vehicle with the ability to recharge from an off-board source, the reported mileage, as determined in a manner consistent with the Society of Automotive Engineers recommended practice for that configuration or a similar practice recommended by the Secretary.
(B) in the case of an electric drive vehicle with the ability to recharge from an off-board source, the reported mileage, as determined in a manner consistent with the Society of Automotive Engineers recommended practice for that configuration or a similar practice recommended by the Secretary.
(3) Engineering integration costs
(3) Engineering integration costs
The term “engineering integration costs” includes the cost of engineering tasks relating to—
The term "engineering integration costs" includes the cost of engineering tasks relating to—
(A) incorporating qualifying components into the design of advanced technology vehicles; and
(A) incorporating qualifying components into the design of advanced technology vehicles; and
(B) designing tooling and equipment and developing manufacturing processes and material suppliers for production facilities that produce qualifying components or advanced technology vehicles.
(B) designing tooling and equipment and developing manufacturing processes and material suppliers for production facilities that produce qualifying components or advanced technology vehicles.
(4) Qualifying components
(4) Qualifying components
The term “qualifying components” means components that the Secretary determines to be—
The term "qualifying components" means components that the Secretary determines to be—
(A) designed for advanced technology vehicles; and
(A) designed for advanced technology vehicles; and
(B) installed for the purpose of meeting the performance requirements of advanced technology vehicles.
(B) installed for the purpose of meeting the performance requirements of advanced technology vehicles.
(5) Ultra efficient vehicle
The term "ultra efficient vehicle" means a fully closed compartment vehicle designed to carry at least 2 adult passengers that achieves—
(A) at least 75 miles per gallon while operating on gasoline or diesel fuel;
(B) at least 75 miles per gallon equivalent while operating as a hybrid electric-gasoline or electric-diesel vehicle; or
(C) at least 75 miles per gallon equivalent while operating as a fully electric vehicle.
(1) reequipping, expanding, or establishing a manufacturing facility in the United States to produce—
(1) reequipping, expanding, or establishing a manufacturing facility in the United States to produce—
(C) ultra efficient vehicles; and
An award under subsection (b) shall apply to—
An award under subsection (b) shall apply to—
(1) facilities and equipment placed in service before December 30, 2020; and
(1) facilities and equipment placed in service before December 30, 2020; and
(2) engineering integration costs incurred during the period beginning on December 19, 2007, and ending on December 30, 2020.
(2) engineering integration costs incurred during the period beginning on December 19, 2007, and ending on December 30, 2020.
(1) In general
(1) In general
(2) Application
(2) Application
An applicant for a loan under this subsection shall submit to the Secretary an application at such time, in such manner, and containing such information as the Secretary may require, including a written assurance that—
An applicant for a loan under this subsection shall submit to the Secretary an application at such time, in such manner, and containing such information as the Secretary may require, including a written assurance that—
(A) all laborers and mechanics employed by contractors or subcontractors during construction, alteration, or repair that is financed, in whole or in part, by a loan under this section shall be paid wages at rates not less than those prevailing on similar construction in the locality, as determined by the Secretary of Labor in accordance with sections 3141–3144, 3146, and 3147 of title 40; and
(A) all laborers and mechanics employed by contractors or subcontractors during construction, alteration, or repair that is financed, in whole or in part, by a loan under this section shall be paid wages at rates not less than those prevailing on similar construction in the locality, as determined by the Secretary of Labor in accordance with sections 3141–3144, 3146, and 3147 of title 40; and
(B) the Secretary of Labor shall, with respect to the labor standards described in this paragraph, have the authority and functions set forth in Reorganization Plan Numbered 14 of 1950 (5 U.S.C. App.) and section 3145 of title 40.
(B) the Secretary of Labor shall, with respect to the labor standards described in this paragraph, have the authority and functions set forth in Reorganization Plan Numbered 14 of 1950 (5 U.S.C. App.) and section 3145 of title 40.
(3) Selection of eligible projects
(3) Selection of eligible projects
(A) In general
(A) is financially viable without the receipt of additional Federal funding associated with the proposed project;
(i) the loan recipient—
(I) has a reasonable prospect of repaying the principal and interest on the loan;
(ii) the amount of the loan (when combined with amounts available to the loan recipient from other sources) will be sufficient to carry out the project.
(B) Reasonable prospect of repayment
The Secretary shall base a determination of whether there is a reasonable prospect of repayment of the principal and interest on a loan under subparagraph (A)(i)(I) on a comprehensive evaluation of whether the loan recipient has a reasonable prospect of repaying the principal and interest, including, as applicable, an evaluation of—
(i) the strength of the contractual terms of the eligible project (if commercially reasonably available);
(ii) the forecast of noncontractual cash flows supported by market projections from reputable sources, as determined by the Secretary;
(iii) cash sweeps and other structure enhancements;
(iv) the projected financial strength of the loan recipient—
(I) at the time of loan close; and
(II) throughout the loan term after the project is completed;
(v) the financial strength of the investors and strategic partners of the loan recipient, if applicable; and
(vi) other financial metrics and analyses that are relied on by the private lending community and nationally recognized credit rating agencies, as determined appropriate by the Secretary.
(4) Rates, terms, and repayment of loans
(4) Rates, terms, and repayment of loans
A loan provided under this subsection—
A loan provided under this subsection—
(A) shall have an interest rate that, as of the date on which the loan is made, is equal to the cost of funds to the Department of the Treasury for obligations of comparable maturity;
(A) shall have an interest rate that, as of the date on which the loan is made, is equal to the cost of funds to the Department of the Treasury for obligations of comparable maturity;
(B) shall have a term equal to the lesser of—
(B) shall have a term equal to the lesser of—
(i) the projected life, in years, of the eligible project to be carried out using funds from the loan, as determined by the Secretary; and 1
(i) the projected life, in years, of the eligible project to be carried out using funds from the loan, as determined by the Secretary; and 1
(ii) 25 years;
(ii) 25 years;
(E) shall be subject to the condition that the loan is not subordinate to other financing.
(5) Conflicts of interest
For each eligible project selected to receive a loan under this subsection, the Secretary shall certify that political influence did not impact the selection of the eligible project.
Administrative costs shall be no more than $100,000 or 10 basis point 2 of the loan.
Administrative costs shall be no more than $100,000 or 10 basis point 2 of the loan.
(1) Definition of covered firm
(1) Definition of covered firm
In this subsection, the term “covered firm” means a firm that—
In this subsection, the term "covered firm" means a firm that—
(A) employs less than 500 individuals; and
(A) employs less than 500 individuals; and
(2) Set aside
(2) Set aside
Of the amount of funds that are used to provide awards for each fiscal year under subsection (b), the Secretary shall use not less than 10 percent to provide awards to covered firms or consortia led by a covered firm.
Of the amount of funds that are used to provide awards for each fiscal year under subsection (b), the Secretary shall use not less than 10 percent to provide awards to covered firms or consortia led by a covered firm.
There are authorized to be appropriated such sums as are necessary to carry out this section for each of fiscal years 2008 through 2012.
(1) The Secretary may use direct hiring authority pursuant to section 3304(b)(3) of title 5 to appoint such professional and administrative personnel as the Secretary deems necessary to the discharge of the Secretary's functions under this section.
(2) The rate of pay for a person appointed pursuant to paragraph (1) shall not exceed the maximum rate payable for GS-15 of the General Schedule under chapter 53 such 3 title 5.
(3) The Secretary may retain such consultants as the Secretary deems necessary to the discharge of the functions required by this section, pursuant to section 1901 of title 41.
In carrying out this section, the Secretary shall coordinate with relevant vehicle, bioenergy, and hydrogen and fuel cell demonstration project activities supported by the Department.
In carrying out this section, the Secretary shall—
(1) provide assistance with the completion of applications for awards or loans under this section; and
(2) conduct outreach, including through conferences and online programs, to disseminate information on awards and loans under this section to potential applicants.
Not later than 2 years after November 15, 2021, and every 3 years thereafter, the Secretary shall submit to Congress a report on the status of projects supported by a loan under this section, including—
(1) a list of projects receiving a loan under this section, including the loan amount and construction status of each project;
(2) the status of the loan repayment for each project, including future repayment projections;
(3) data regarding the number of direct and indirect jobs retained, restored, or created by financed projects;
(4) the number of new projects projected to receive a loan under this section in the next 2 years, including the projected aggregate loan amount over the next 2 years;
(5) evaluation of ongoing compliance with the assurances and commitments, and of the predictions, made by applicants pursuant to paragraphs (2) and (3) of subsection (d);
(6) the total number of applications received by the Department each year; and
(7) any other metrics the Secretary determines appropriate.